Qlogic 3400 Series, Руководство пользователя

Страница: 23 / 28

14 83840-546-03 B
6
Testing
This chapter contains a testing example and describes how to check the VMS on
the host and compute host levels.
Example Test
In this example, two VMs are created. A VM named P1 is created on one host
using the Compute1 node; a VM named P2 is created on a different host using the
Compute2 node.
To ensure that the VMs are up and running:
1. Log in to the system using either a floating IP address or the Horizon
dashboard Instance log in console. For the 45000 Series Adapters, ensure
that the correct version of the
qede
/
qed
driver has been loaded (see
“Installing Required Packages and System Configurations” on page 4 ).
2. Ping between the two VMs with an IP demo-net assigned IP address.
Following is a sample output.