6
7
Installation/ Mounting Hole Specifications
• First, machine taps or holes on the mounting surface (
①
).
• The mounting holes of this product are 4.5mm(D type) and 6.3mm(K type, MF type) in diameter.
• When machining taps, fasten the bolt through the mounting hole of the product.
• When machining holes, insert the bolt through the hole of the product, and tighten the nut from the opposite side of the mounting
surface.
■
Installation
• Machine holes on the mounting surface referring to the diagram below.
■
Mounting Hole Specifications
140
240
90
10
0
45
45
30
15
4-Ø4.5 HOLES
4-Ø4.5 HOLES
4-Ø6.3 HOLES
3-Ø6.3HOLES
QML/ QMHL-150-D
QML/ QMHL-150/ 250-K
QML/ QMHL-250-D
QML/ QMHL-150/ 250-MF
①
①
①
①
Installation Environment and Protection Rating
• This product is designed for use with protection rating of IP67/ IP69K.
• If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating
indicated(IP67/ IP69K), it may cause malfunction or damage to the product.
• For further information, please visit our website (www.qlight.com).
