Qimarox PRORUNNER mk1, Руководство по сборке

Страница: 8 / 50

Assembly instructions PRORUNNER mk1 8
2 Safety
The responsibility of Qimarox B.V. lapses if the user does not comply with the guidelines and
instructions provided in these assembly instructions for the assembly and construction of the
PRORUNNER mk1.
2.1 Safety symbols
The following symbols are used in these assembly instructions:
Risk of damage to the PRORUNNER mk1 if the instructions are not followed carefully.
Risk of serious injury to the user if the instructions are not followed carefully.
The following safety symbols may be attached to the PRORUNNER:
Danger for which the additional precautions described in this manual must be taken.
Danger of electrical voltage, attached to the control cabinets
Instructions for switching off the machine before carrying out maintenance activities,
attached to the side frame of the machine.
No access beyond this point, attached to every access door or opening before reaching
the danger zone.
Risk of trapping upper limbs, if applicable attached near the openings near the forks for
the infeed and outfeed roller tracks.
Risk of trapping upper limbs between moving rollers, if applicable attached near the
infeed and outfeed roller tracks.