Qimarox PALLETDISPENSER PD1, Руководство пользователя

Страница: 16 / 22

Software function blocks Pallet dispenser PD1 - SIEMENS
16
6.4 Function block settings
The settings consist of one UDT

“Settings_Palletdispenser_PD1”
Everything can/will be determined from the Qimarox configuration sheet.
We strongly recommend using the PDF configuration sheets provided by Qimarox for this.
Tabel 07: Settings pallet dispenser PD1
Naming Data
type Unit Description
Configuration.Mode Int 1..2 1 = Start position upper position (Basic position)
2 = Start position bottom position (Wait position)
Configuration.Pallettype Int 1..99 Actual pallettype in dispenser, this must match the
pallettype requested when using de-stacking
Configuration.Double Bool 0/1 0 = single pallet sensor (B2)
1 = double pallet sensor (B10)
MaximumDurationUpDown Int ms. Maximum duration of movement before creating alarm
MaximumDurationForks Int ms. Maximum duration of movement before creating alarm
6.5 Function block handshake
The handshake structure consists of one UDT

“Handshakes_PalletDispenser_PD1”
This enables the other equipment to communicate and control with the pallet dispenser
Tabel 08: Handshake pallet dispenser PD1
Naming Data
type Unit Description
Command.Receive Bool 0/1 TRUE = Request to receive a pallet (Stacking)
Keep this command set to TRUE until pallet dispenser gives status
“Busy”
Status.Blocked Bool 0/1 TRUE = Alarm active OR not in right step
Status.PalletPresent Bool 0/1 TRUE = Sensor pallet present (B7)
Status.BasicPosition Bool 0/1 TRUE = Upper position (B1), forks in pallet stack (B5)
Status.WaitPosition Bool 0/1 TRUE = Bottom position (B3) ,forks out of pallet stack (B13)
Status.Busy Bool 0/1 TRUE = Busy with cycle
Status.Pallettype Int 1..99 Actual pallet type
Status.Step Int 1..20 Actual step number