Operating
screens
Operating manual HR9
– QS203263
53
Program settings layer pusher
Setting
Description
Speed profile
layer pusher
Speed during shifting of a layer from pattern-formation conveyor to layer
processing
Percentage of Nominal speed. 100% = Nominal speed
Acceleration is in seconds, from standstill to desired speed.
Deceleration is in seconds, from actual speed to standstill.
Speed profile
soft touch layer
As soon as the layer pusher moves a layer from the pattern-formation conveyor to
the layer processing, it can be chosen to do this at a lower speed than is set in the
speed profile.
This makes it possible to reduce the impact of the moving pusher on the stationary
layer.
Enter the starting position and the length of the area to which a different speed
profile applies. 0=not active
