QIANGLI DUVOSS Q1, Инструкция по эксплуатации

Страница: 2 / 6

01
Take out the earbuds English
Before using the earbuds for the first time.
put them back into the charging compartment
and close the charging compartment. Connect
it to the Type-c cable to charge the Bluetooth
earbuds DUVOSS Q1.
Power on :
The charging compartment is turned on when the cover
is opened. The left and right earphones are taken out from the
charging compartment, and the left and right earphones will be
automatically paired with an interval of no more than 5 seconds.
After the boot is successful, it will enter the Bluetooth connection
and pairing state with the mobile phone (the connected mobile
phone can automatically pair with the Bluetooth successfully).
Power off : Put the earphone into the charging box, and it will shut
down automatically when the cover is closed. If the Bluetooth has
not been connected after turning on, the headset will automatically
turn off in about 5 minutes.
In the power-on state, put the left and right
earbuds in the charging compartment, they
will automatically shut down and the charging
starts.