Qiagen Rotor-Gene Q MDx CE Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 208

Qiagen Rotor-Gene Q MDx CE Скачать руководство пользователя страница 18

Rotor-Gene Q MDx CE User Manual 02/2022

18

Toxic fumes

If working with volatile solvents or toxic substances, you must provide an efficient laboratory
ventilation system to remove vapors that may be produced.

2.5

Waste disposal

Used labware may contain hazardous chemicals. Such wastes must be collected and disposed of
properly according to local safety regulations.

For more information about how to dispose of the Rotor-Gene Q MDx, see “Waste Electrical and
Electronic Equipment (WEEE)”, page 196.

2.6

Mechanical hazards

The lid of the Rotor-Gene Q MDx must remain closed during operation of the instrument.

WARNING

Moving parts

To avoid contact with moving parts during operation of the Rotor-Gene Q MDx,
the instrument must be operated with the lid closed.

WARNING

Risk of personal injury and material damage

Open and close the lid of the Rotor-Gene Q MDx carefully to avoid trapping
fingers or clothing.

WARNING

Damage to the instrument

Make sure that the rotor and locking ring are installed correctly. If the rotor or
locking ring show signs of mechanical damage or corrosion do not use the
Rotor-Gene Q MDx; contact QIAGEN Technical Services.

«
...
16
17
18
19
20
...
»

Содержание Rotor-Gene Q MDx CE

















































































































































































































Отзывы:

Нет отзывов