Qiagen QIAgility, Руководство пользователя

Страница: 85 / 334

QIAgility Software
QIAgility User Manual 11/2011 5-23
user group are denied access when they attempt to start the
QIAgility Software
When user access control is disabled, all users are given
“Manager” access.
Upgrading the software does not affect user access control.
5.4.3 Enabling access control
Upon installation, the QIAgility Software user access control
features are disabled and all users have “Manager” access.
(See the previous section for user group descriptions.)
A Manager enables the user access control with
“Options/User management/Enable access control”.
You can toggle between enabled and disabled states. A tick
appears next to “Enable access control” when this option is
enabled.
If the access control is enabled it is directly active. Be careful
to enable the access control only if you are a Manager.
5.4.4 Managing user groups
If your computer belongs to a domain, the user groups have
to be created and used in the domain. If you are working
with a stand alone computer, the user groups are created
and used locally. In both cases, local Administrators have full
access to the software.
If you are a Manager, you can use the management
functions on the menu bar “Options/User
Management/Users & Groups” to change the groups
membership. You must be an Administrator to save your
changes.
To set the groups membership of users on the laptop
computer:
1.
Open the “Options” menu, and select “User
management/Users & Groups”.
2. The “Users & Groups” window appears.
3. Select the user from the “Users” panel.