12
QIAcube
Connect Safety Instructions and Quick Start Guide 04/2019
Waste disposal
Used labware, such as sample tubes, QIAGEN spin columns, filter-tips, buffer bottle and
enzyme tubes, or rotor adapters, may contain hazardous chemicals or infectious agents from
the purification process. These hazardous wastes must be collected and disposed of properly
according to local safety regulations.
WARNING
Hazardous chemicals and infectious agents
The waste may contain toxic material and must be disposed of
properly. Refer to your local safety regulations for proper
disposal procedures.
(W16)
Mechanical hazards
The hood of the QIAcube Connect must remain closed during operation of the instrument. Only
open the hood when instructed to do so by the instruction for use.
While loading the worktable, always stand clear of the instrument. Do not lean on the
worktable when the robotic arm of the instrument is moving to reach loading position with its
lid open. Wait until the robotic arm completed its movements before you start to load or
unload.
WARNING
Moving parts
Avoid contact with moving parts during operation of the
QIAcube Connect. Under no circumstances should you place
your hands under the robotic arm when it is lowering. Do not
attempt to move any tip racks or tubes whilst the instrument is
operating.
(W17)