EZ2 Connect MDx User Manual 05/2022
142
An overview of maintenance task status can be found under the Maintenance tab. The Overview
tab displays a table with the tasks listed, when they were last performed, and when they should
be performed again. Additionally, the table has a column with an icon that warns of overdue
maintenance.
Figure 145. Maintenance overview
6.1
Cleaning agents
The surfaces and removable parts of the EZ2 must be cleaned and disinfected with compatible
detergents and disinfectants. Please follow the instructions provided by the manufacturer of such
materials to safely clean the instrument.
Note
: If you want to use different disinfectants than the recommended ones, make sure that they
have the same composition.
If you are unsure about the suitability of the detergents or disinfectants to be used with the EZ2, do
not use them.
General cleaning of the EZ2, with the exception of the hood and touchscreen, can be done using
mild detergents/disinfectant, such as the Mikrozid
®
AF sensitive (www.schuelke.com), or 70%
ethanol. 70% ethanol can be used on the worktable. The hood and touchscreen should
ONLY
be
cleaned with lint free tissue moistened with water.
