Removing and Installing Blade
Always ensure the tool is switched OFF and unplugged before removing or
installing the blade. To remove the blade, grip the outside flange with a box
wrench and turn the socket wrench clockwise. To install, follow the removal
procedures in reverse.
Replacing Carbon Brushes
Remove and check the carbon brushes regularly. Replace when the carbon
brushes are worn to about 6mm or less. Keep the carbon brushes clean to
ensure unrestricted movement in the holder. Both carbon brushes should be
replaced at the same time. Use a screwdriver to remove the brush caps and
to replace the worn carbon brushes. Secure the brush caps after inserting
new brushes.
Maintenance:
WARNING! WHEN SERVICING, USE ONLY IDENTICAL REPLACEMENT PARTS.
USE OF ANY OTHER PARTS MAY CREATE A HAZARD OR CAUSE PRODUCT
DAMAGE.
• Do not attempt to make any adjustments while the tool is in operation.
• Always remove the electric cord from the power supply before changing
parts, lubricating the tool or when working on the unit to avoid possible
serious injury.
• Keep the tool clean from accumulated dust.
WARRANTY
IF THE PRODUCT FAILS WITHIN ONE YEAR FROM THE DATE OF PURCHASE
DUE TO A DEFECT IN WORKMANSHIP OR MATERIAL, Q.E.P. WILL REPAIR
AND/OR REPLACE IT FREE OF CHARGE IF THE PRODUCT IS RETURNED TO
THE RETAILER/DISTRIBUTOR WHERE IT WAS ORIGINALLY PURCHASED.
THIS WARRANTY DOES NOT COVER NORMAL WEAR AND TEAR TO THE
PRODUCT, OR ANY DAMAGE THAT RESULTS FROM ACCIDENT, MISUSE,
ABUSE, OR NEGLIGENCE. Q.E.P.'S OBLIGATION UNDER THIS WARRANTY IS
LIMITED TO REPAIR AND/OR REPLACEMENT OF THE PRODUCT. LIABILITY
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE OR LOSS IS
SPECIFICALLY EXCLUDED, AND Q.E.P. SHALL HAVE NO LIABILITY FOR ANY
SUCH INCIDENTAL OR CONSEQUENTIAL DAMAGE. THIS WARRANTY IS
VOID IF THE PRODUCT OR ANY OF ITS COMPONENTS ARE MODIFIED,
ALTERED, OR IN ANY WAY CHANGED, OR IF THE PRODUCT IS USED IN A
MANNER OR WITH A BLADE THAT IS NOT RECOMMENDED BY Q.E.P. ALL
ACCESSORIES ARE EXCLUDED FROM THE WARRANTY AND SUBJECT TO
THE MANUFACTURER'S WARRANTY. IF THE PRODUCT IS USED FOR OTHER
THAN PROFESSIONAL PURPOSES, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE IS EXCLUDED.
NO EXPRESS WARRANTIES ARE GIVEN. BUYER ASSUMES ALL RISK OF
USE, HANDLING, AND STORAGE OF THE PRODUCT NOT IN STRICT
ACCORDANCE WITH THE INSTRUCTIONS.
STK#
DESCRIPTION PRICE
21643-01 Stand
$1.20
21643-02 Knob
$1.00
21643-03 Washer (Set of 4)
$1.00
21643-04 Guiding Board
$11.90
21643-05 Rivet
$.55
21643-06 Pole
$.75
21643-07 Screw (Set of 2)
$.95
21643-08 Washer (Set of 4)
$1.00
21643-09 Pin
$2.00
21643-10 Gear Box
$7.15
21643-11 Sealer Loop
$1.75
21643-12 Bearing
$1.75
21643-13 Big Gear
$4.85
21643-14 Key
$1.85
21643-15 Shaft
$2.00
21643-16 Bearing
$2.00
21643-17 Sealing Washer
$1.75
21643-18 Cover
$6.60
21643-19 Washer (Set of 4)
$1.00
21643-20 Spring Washer (4)
$1.00
21643-21 Screw (Set of 4)
$1.65
21643-22 Flange (Set of 4)
$1.65
21643-23 Trademark
$.10
21643-25 Flange
$4.40
21643-26 Bolt
$1.65
21643-37 Screw
$1.65
21643-38 Small Gear
$2.00
STK#
DESCRIPTION PRICE
21643-39 Bearing
$2.00
21643-40 Armature Assembly
$19.35
21643-41 Damping Washer
$2.00
21643-42 Nozzle
$3.00
21643-43 Screw (Set of 2)
$1.65
21643-44 Starter
$16.85
21643-45 House
$16.85
21643-46 Label
$.10
21643-47 Screw Bolt (2)
$1.65
21643-48 Carbon Brush (2)
$4.40
21643-49 Carbon Box (2)
$2.20
21643-50 Damping Pole (2)
$1.65
21643-51 Back Cover
$4.25
21643-52 Screw (Set of 4)
$1.85
21643-53 Screw (Set of 4)
$1.85
21643-54 Spring Washer (2)
$1.65
21643-55 Washer (Set of 6)
$1.25
21643-56 Decorative Skin
$2.00
21643-57 Cord Jacket
$4.85
21643-58 Power Cord
$7.90
21643-59 Cord Clamp
$.75
21643-60 Screw (Set of 2)
$1.65
21643-61 Switch Cover
$3.85
21643-62 Switch
$13.20
21643-63 Knob Cover
$.75
21643-64 Handle
$5.90
3
