Quality in Electronic Manufacturing
Pag. 4 di 27
HB 237.16
1 - 1 SUPPLEMENTARY NATURE OF MANUAL
This manual is to be considered as a supplement to the "Installation, maintenance and servicing manual" which
contains information on wiring, checking and eliminating faults, start-up and maintenance procedures. This manual
gives instructions on the use and correct programming of the instrument.
You are urged, therefore, to read the manual carefully and, if you have any queries, to contact QEM for further
explanations by sending the assistance fax contained in the manual.
1 - 2 REFERENCES
The documentation relative to the instruments designed and sold by QEM has been divided into different booklets for
effective and speedy consultation according to the type of information required.
User Manual
Explanation of software.
This manual gives all the necessary
information for the understanding and
use of the instrument described. The
manual deals with the instrument
software, it gives information on the
understanding, programming,
calibration and use of the instrument
described.
Once the instrument is installed
following the indications given in the
Installation, maintenance and
servicing manual, this user manual
gives all the necessary information
for the correct use and programming
of the instrument.
Installation, maintenance and
servicing manual
All the necessary information for
installation, maintenance and
assistance.
In-depth explanations of all essential
details for correct installation and
maintenance.
The aim is to provide you with valid
and accurate information for the
manufacture of products of
recognised quality and reliability. It is
also a valid support for whoever
needs technical assistance
concerning a machine that includes
a QEM instrument.
Hardware structure
Basic information on the standard
hardware in the series plus
customisation possibilities.
This booklet is enclosed with the
user manual and describes the
hardware configuration for the series
of instruments described.
It also gives the standard electrical,
technical and mechanical
specifications for the series, together
with the possibilities of hardware
customisation in relation to the
different software versions.
