Quality in Electronic Manufacturing
Pag. 17 di 27
HB 237.16
FUNCTION
DISPLAY
DESCRIPTION
F
U 3
0
Choice of functions
for outputs U3, U4
U5, U6, U7, U8
0
= Output disabled.
1
= The output is activated when the count is equal to or greateer
than the value introduced in the work program (quotas 3÷8).
The count increases (UP).
2
=The output is activated when the count is equal to or greater
than the value introduced in the work program (quotas 3÷8)
and remains enabled for the time set in the work program
(timer 3÷8).
The ocunt increases (UP).
3
= The output is activated when the count is equal to or greater
than the value introduced in the work program (quotas 3÷8)
and remains enabled for the delta set in the work program
(delta 3÷8).
The count increases (UP).
4
= The output is activated when the count is equal to or less than
the value introduced in the work program (quotas 3÷8).
The count decreases (DOWN).
5
= The output is activated when the count is equal to or less than
the value introduced in the work program (quotas 3÷8) and
remains enabled for the time set in the work program (timer
3÷8).
The count decreases (DOWN).
6
= Theoutput is activated when the count is equal to or less than
the value introduced in the work program (quotas 3÷8) and
remains enabled for the delta set in the work program (delta
3÷8).
The count decreases (DOWN).
○○○○○○
F
U 8
0
These displays appear if the parameter "Expansion enabling" is set on 1
Output U1
logic status
L
I
0
0
=Output U1 is normally de-activated.
1
=Output U1 is normally activated.
Output U2
logic status
L
2
0
0
= Output U2 is normally de-activated.
1
= Output U2 is normally activated.
