Quality in Electronic Manufacturing
Pag. 11 di 27
HB 237.16
Charatteristics of output expansions (option L6 or U6)
Refer to the chapter entitled "Electrical characteristics" in the Hardware structure" booklet enclosed with this manual.
Name
U3
P
C2
C
Quota 3.
With set-up parameter "
L3
" set on "0", the output is activated when the count reaches the value of
the quota set as parameter
"3"
in the work program. When the set-up parameter "
L3
" is set on "1", the output
is de-activated when the count reaches the value of the quota set as parameter
"3"
in the work program.
U4
P
C2
C
Quota 4.
With set-up parameter "
L4
" set on "0", the output is activated when the count reaches the value set
as parameter
"4"
in the work program. When the set-up parameter "
L4
" is set on "1", the output is de-activated
when the count reaches the vaue of the quota set as parameter
"4"
in the work program.
U5
P
C2
C
Quota 5.
With set-up parameter "
L5
" set on "0", the output is activated when the count reaches the value of
the quota set as parameter
"5"
in the work program. When the set-up parameter "
L5
" is set on "1", the output
is de-activated when the count reaches the value of the quota set as parameter
"5"
in the work program.
U6
P
C2
C
Quota 6.
With set-up parameter "
L6
" set on "0", the output is activated when the count reaches the value of
the quota set as parameter
"6"
in the work program. When the set-up parameter "
L6
" is set on "1", the output
is de-activated when the count reaches the value of the quota set as parameter
"6"
in the work program.
U7
P
C2
C
Quota 7.
With set-up parameter "
L7
" set on "0", the output is activated when the count reaches the value of
the quota set as parameter
"7"
in the work program. When the set-up parameter
"
L7
"
is set on "1", the output
is de-activated when the count reaches the value of the quota set as parameter
"7"
in the work program.
U8
P
C2
C
Quota 8.
With set-up parameter "
L8
"set on "0", the output is activated when the count reaches the value of
the quota set as parameter
"8"
in the work program. When the set-up parameter
"
L8
"
is set on "1", the output
is de-activated when the count reaches the value of the quota set as parameter "8" in the work program.
Operating logic
Polarizer
Minimum activation
time [ms]
Descrizione
Key
C = Continuous signal.
P = Programmable in set-up.
