Qeedji TAB10s, Руководство пользователя

Страница: 6 / 115

6
1.1 Introduction
This manual explains how to install and configure your TAB10s device. It explains also how to install a third party APK and make a AQS operating
system upgrade.
Content of the package
Items Description Quantity
Device TAB10s device with
AQS
embedded 1
Screen protection film Stuck on the screen 1
Mounting bracket Bracket for wall mounting 1
Drilling pattern leaflet Drilling pattern 1
Screws M2 x 35 mm (1,37 ") slotted countersunk screw (DIN 963) - a2 stainless steel 2
Adhesive tape
3M double sided tape 4905, material: VHB
W x H x D: 65 mm (2.56 ") x 19 mm (0.75 ") x 0.5 mm (0.02 ")
2
Pads
3M single sided tape, material: silicone
∅: 8 mm (0,314 "), D: 1 mm (0,039 ")
4
Recommendations and warnings
This device is designed to be used indoor and can work 24/7.
The device is delivered without a power supply unit. Depending on your needs,
Qeedji
is making recommendation for suitable power supply
references in the chapter § Power supply .
◬
Before supply the TAB10s device with the USB connector of your computer, check with your computer's manufacturer that the USB
connectors is suitable to deliver a sufficient power.
◬
In case you had to remove the micro SD card, ensure first that the TAB10s device is powered off before removing or inserting the micro SD
card. In case of bad handling, the micro SD card replacement would not be covered by the warranty.
This device is a Class A device. In a residential environment, this device may cause radio interference. In this case, the user is asked to take
appropriate measures.
☛ In this documentation, the unit of measurement for dimensions is done in millimeters followed by its equivalent value in inches.