Qeedji SBL10e, Руководство пользователя

Страница: 8 / 37

8
1.1.3 Installation
☛ Install the SBL10e device on the E thernet wall plugs of the buildings following the installation map given by your IT departement.
The SBL10e device has to be plugged to an Ethernet wall plug supporting PoE IEEE802.3af.
G iven the device footprint, it is preconised to use Ethernet wall plug plastron with a right insertion.
Consequently, the Ethernet wall plug whose plastron is angled is not supported.
☛ Thanks to the lock pin of its E thernet connector, the SBL10e device can be installed on vertical surfaces, like walls as well as horiz ontal
surfaces, like ceilings.