background image

 

 

Rev: 01  

P/N: 95343 

Page | 27  

b.

 

Trending function is turned on, which can extend the time required to achieve stabilization. 

5.

 

The parameter the user wants is not on the Stabilization Criteria Screen.  

a.

 

Under the Sensors & Parameters list the desired parameter needs to be selected. 

6.

 

The parameter the user wants is not on the main screen. 

a.

 

The parameter may not be selected in the Stabilization Criteria screen.  

6. Warranty 

Q.E.D. ENVIRONMENTAL SYSTEMS, INC. ("QED") warrants to the original purchaser (“Purchaser”) of its 
groundwater sampling products (“Products”) that the products shall be free of defects in materials and 
workmanship on the date of sale, subject to the limitations below. Any failure of the products to conform to this 
warranty will be remedied by QED in the manner provided herein. 

This warranty shall be limited to the duration and the conditions set forth below.  Warranty duration is 
calculated from the original date of purchase. 

1.   Dedicated-Use System Products – Ten (10) year warranty on dedicated bladder pumps with PTFE (Teflon

®

bladders equipped with original equipment inlet screens and used in periodic, non-continuous groundwater 
sampling (up to 52 samples events per year.) Five (5) year warranty on dedicated bladder pumps using 
Teflon-free proprietary polymer bladders.  All other components, equipment and accessories are warranted 
for one (1) year except as stated below. 

2.  Portable Systems and Controls - Sample Pro portable-use pumps, MicroPurge Controllers and Water Level 

and Drawdown Meters are warranted for one (1) year.  Hose reel and caps are warranted for ninety (90) 
days.  Tubing used in a Portable System is covered by a ninety (90) day material and workmanship warranty. 
There will be no warranty for application on tubing when used as part of a Portable System. 

3.  Separately Sold Parts, Spare Parts Kits and Repairs - Separately sold parts and spare parts kits are warranted 

for ninety (90) days.  Repairs performed by QED are warranted for ninety (90) days from date of repair or for 
the remaining term of the original warranty, whichever is longer. 

4. Flow Cell Systems – The Sonde, OEM Handheld Display and Sensors are warranted for three years from date 

of purchase. Aftermarket handheld displays (e.g., ruggedized tablet devices) are covered by the aftermarket 
device standard limited warranty.  This warranty does not apply to batteries of any type or any other items 
that carry shelf lives (i.e. calibration solutions). Also the warranty does not cover products damaged by 
improper installation, or application, misuse, abuse, neglect or accident. NOTE: THE FLOW CELL SYSTEMS 
WARRANTY EXCLUDES COVERAGE OF COMPONENTS CONSUMED THROUGH NORMAL USE, SUCH AS 
REPLACEMENT OF REFERENCE ELECTRODE JUNCTION OR SOLUTION. 

Purchaser’s exclusive remedy for breach of said warranty shall be as follows:  

If Purchaser notifies QED in writing within the applicable warranty period of a claimed defect in the Product and 
QED determines after inspecting the Product that the defect is covered by the warranty, QED will repair the 
Product without charge to Purchaser. If QED for any reason cannot repair a Product determined by QED to be 

Содержание MicroPurge MP25































Отзывы: