QED LANDTEC i-Q Series Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 51

QED LANDTEC i-Q Series Скачать руководство пользователя страница 31

Operation Manual

GEM and GEM PRO

OMiQGEM-L Issue.02

Page 31 of 51

MAINTENANCE

To prevent fire and explosion:

•

Do not open in a hazardous or potentially explosive area.

•

Only use QED Battery PMMPB for i-Q.

•

Use only Energizer

®

CR2032 (QED part number iQ-COINCELL) for backup battery replacement.

•

Only use AA Type Energizer

®

L91 batteries for Affinity.

•

Do not attempt to charge non-rechargeable batteries.

To avoid misuse hazards:

•

Do not alter or modify the equipment outside of any instructions provided by QED.

•

Only QED-approved components are to be used as replacement parts. Alternatives may void agency
approvals and create safety hazards.

•

Repair of this equipment shall be carried out following the applicable code of practice.

•

When the battery is ready for disposal, it must be disposed of under the ordinance of the local authority
and not disposed of through general waste.

•

Comply with all applicable safety regulations.

To avoid toxic fume hazards:

•

Open in a well-ventilated area.

Note: For further information please contact Technical Support at QED on:

TOOLS

The i-Q comes supplied with a multi-use tool. This tool can be used on the screws for the i-Q battery, case back,
and modules. The driver bit is double-ended and is a Phillips No. 1 and Slotted No. 4.5mm:

Figure 8

–

Multi-use Tool

QED Environmental Systems Ltd.

+44(0)333 800 0088

[email protected]

QED Environmental Systems, Inc.

+1 (800) 624-2026

[email protected]

«
...
29
30
31
32
33
...
»

Содержание LANDTEC i-Q Series




















































Отзывы:

Нет отзывов