QED LANDTEC i-Q Series, Руководство по эксплуатации, Страница: 18 / 51

Operation Manual
GEM and GEM PRO
OMiQGEM-L Issue.02
Page 18 of 51
STARTING THE i-Q
1) Power on the i-Q by holding the power key for 2 seconds.
Note: You may be prompted to set the Time and Date if it is the instrument’s first turn-on or the battery has been
disconnected for more than 10 minutes.
a. Time and date can be set from timezone and GNSS location (e.g. GPS) or set manually
2) A self-test will commence and assess the instrument.
Note: If there are any faults during Self-Test, select the Help key for assistance.
3) If Technician Login is enabled, the user will need to select their profile and if applicable, enter their
password, before proceeding to the
Main Reading Screen .
STATUS LED
The status LED gives an indication of i-Q or Affinity condition while in its on state.
i-Q
Sequence Color Status
Purple Self-Test in progress
Green Self-Test pass
Red Self-Test fail
Blue flashing Recovery mode
Red flashing Critical battery
Red rapid flashing Critical shutdown
Red, Green, Blue Firmware update in progress
iQV03