background image

2B - Screw into Stud Behind Drywall

Locate the studs by using a stud finder. Carefully mark the 

center locations of each stud at the top of the furniture.

Line up the straps as straight as possible from the TV with 

the closest stud. Now mark that location 12” down from 

the top of the furniture. Double check one more time 

with studfinder to insure correct location. Next peel the 

protective liner from the adhesive* and position the Wall 

Brackets in the marked locations with the straps pointing 

upwards.

Using the included 1.5” screws, attach each Wall Bracket 

using the two screw holes in the center. Once screwed in 

attach the Covers over the Wall Brackets while holding 

straps up.

*IMPORTANT: The adhesive only helps to hold the Wall 

Bracket during installation. The Wall Bracket MUST be at-

tached with the SecureHooks™ or screws for safety!

Step 3 - Attaching to the Furniture

There are two options to attach the 2 in 1 Anti-Tip TV 

Straps to the furniture. (3A) On top of the furniture with 

the Zero-Screw Adhesive Furniture Plate or (3B) Screw 

the Cam Lock into the back of your furniture.

3A - Adhesive Furniture Plate

Line up the first Furniture Plate so it’s positioned in line 

between the TV mounting and the Wall Bracket. Remove 

protective Liner and while holding the Cam Lock against 

the back of the furniture, fold the Furniture Plate down un-

til it sticks. Press on it for 30 seconds for good adhesion. 

Do the same for the second strap on the other side. 

Note: The adhesive needs to set for 24 hours for maximum 

adhesion.

3B - Screw into the back of the Furniture

When attaching with screws to the back of the furniture, 

the Furniture Plate can be removed by unscrewing the 

hinge pin and pulling it out. Line up the Cam Lock so it’s 

positioned in line between the TV mounting and the Wall 

Bracket. Mark the hole locations and drill pilot holes using 

a 3/32” drill bit. Be careful not to damage the top of your 

furniture. Attach the Cam Locks with included 1.5” screws.

3A

2B

3B

Отзывы: