manualshive.com logo in svg

QCT QuantaGrid Series, Руководство по обслуживанию

Поделиться
Скачать
QCT QuantaGrid Series Скачать руководство пользователя страница 46

I

NSTALLING

 H

ARDWARE

P

ROCESSOR

 2-21

2.9 Processor

Removing the Processor

To remove the processor:

1. Pull the system out of the rack to disconnect from power.

2. Remove the top cover.

3. Remove the processor heat sink.

4. Push the locking lever down and in to unlock the load plate.

Figure 2-20.

Unlocking the locking lever

5. Push the release lever down and in to release the load plate.

Figure 2-21.

Unlocking the locking lever

Note:

All the instructions and images in this section are for illustration purposes only and may not 
reflect the actual product.

CAUTION!

E

NSURE

 

ALL

 

POWER

 

IS

 

DISCONNECTED

 

FROM

 

THE

 

SYSTEM

 

BEFORE

 

PROCEEDING

.

WARNING!

The processor remains hot after the system has been powered down. Allow sufficient time to 
cool before handling system components.

!

!

Содержание QuantaGrid Series








































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды