QBSOFTHAND2 RESEARCH USER MANUAL —
41
37
http://www.mingw.org
38
http://gnuwin32.sourceforge.net/packages/make.htm
Linux Ubuntu
Apple macOS
Download
"XCode"
from the App Store, this will install
"gcc/g++"
and
"make"
utilities.
Microsoft Windows
Download
and install it. Open MinGW Installation Manager, from the left panel select basic
setup, then from the right panel select mingw32-base and mingw32-gcc-g++, then click on
Installation -> Apply Changes
. This will install the
gcc/g++
compiler. To use it from the command
line you need to provide to windows the binary path to the executable. Go to System Properties and click
on Environment Variables. In the System Variable windows, look for
path
, select it and click
edit
. Go
to the end of the Variable Value field, add a
;
separator and add the path to the binary folder for gcc
(usually it is in
C:\MinGW\bin
).
Download the
make
utility from
. Follow the installation instruction. In the end you will need to add
the binary path to the Environment Variables. To do that follow the previous steps. (Usually the binary
folder for the make utility is in
C:\Program Files (x86)\GnuWin32\bin
).
8.2 Simplified CAD models of the qb SoftHand2 Research
8.2.1 Problem
Where can I find CAD models or simplified meshes of the qb SoftHand2 Research?
LINUX FRIENDLY:
You should
have both
"gcc/g++"
and
"make"
already installed if you are running on any
Linux distribution.
NOTE:
Note: if
you have the CMD already opened when performing the installation, you probably will
need to reopen a new one to be able to use the utilities.
Содержание SoftHand2 Research
Страница 4: ...8 5 The USB flash drive is not working 44...