Q2 Q2A, Техническое руководство

Страница: 847 / 866

Parameter
Details
12
12.11 T: AUTOTUNING
SIEPYEUOQ2A01G AC Drive Q2A Technical Manual 847
■
T1-01 Auto-tuning Mode Selection
No.
(Hex.)
Name Description
Default
(Range)
T1-01
(0701)
Auto-tuning Mode
Selection
Sets the type of Auto-Tuning.
Determined by A1-02
(Determined by A1-02)
0 : Rotary Auto Tune
1 : Static1 AutoTune
2 : Static (R)
■
T1-02 Motor Rated Power
No.
(Hex.)
Name Description
Default
(Range)
T1-02
(0702)
Motor Rated Power
Sets the motor rated output in the units from o1-58 [Mot Capacity Unit] .
Determined by o2-04 and
C6-01
(0.00 - 650.00 kW)
Note:
Capacities 300 kW and smaller are set in units of 0.01 kW. Capacities larger than 300 kW are set in units of 0.1 kW. The maximum
applicable motor output changes when the setting of
C6-01 [ND/HD Duty Selection] changes.
■
T1-03 Motor Rated Voltage
No.
(Hex.)
Name Description
Default
(Range)
T1-03
(0703)
Motor Rated Voltage
Sets the rated voltage (V) of the motor. Enter the base speed voltage for constant output motors.
Determined by o2-04 and
C6-01
(400 V Class: 0.0 - 511.0 V)
If you do Auto-Tuning on a drive-dedicated motor or a specialized motor for vector control, the voltage or
frequency can be lower than that of a general-purpose motor. Always compare the data from the nameplate or test
report with the Auto-Tuning results and check for differences. Enter the voltage necessary to operate the motor in
no-load conditions at rated speed for better control precision around rated speed. If the motor test report or the
motor nameplate is not available, enter approximately 90% of the motor rated voltage.
If the drive input power supply voltage is low, enter approximately 90% of the input voltage. When the input
power supply voltage is low, the current will increase. Make sure that the main power supply capacity is correct
and use a molded-case circuit breaker for the drive.
■
T1-04 Motor Rated Current
No.
(Hex.)
Name Description
Default
(Range)
T1-04
(0704)
Motor Rated Current
Sets the rated current (A) of the motor.
Determined by o2-04
(10% to 200% of the drive
rated current)
Set the motor rated current between 50% and 100% of the drive rated current for the best performance. Enter the
current at the motor base speed.
■
T1-05 Motor Base Frequency
No.
(Hex.)
Name Description
Default
(Range)
T1-05
(0705)
Motor Base Frequency
Sets the base frequency (Hz) of the motor.
50.0 Hz
(0.0 - 590.0 Hz)
Auto-Tuning sets T1-05 = E1-04 [Max Output Frequency] . If T1-05 < 40 Hz, E1-04 = 40 Hz. If you operate the
drive at a speed that is higher than the base frequency, or if you operate in the field weakening range, set E1-04
( E3-04 for motor 2) to the maximum output frequency after you complete Auto-Tuning.
■
T1-06 Motor Poles Number
No.
(Hex.)
Name Description
Default
(Range)
T1-06
(0706)
Motor Poles Number
Sets the number of motor poles.
4
(2 - 48)
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV
V/f CL-V/f OLV CLV AOLV OLV/PM OLV/PM AOLV/PM CLV/PM EZOLV