
560
SIEPYEUOQ2A01G AC Drive Q2A Technical Manual
■
b4-04 2NO-2CM OFF Time Delay
No.
(Hex.)
Name
Description
Default
(Range)
b4-04
(0B31)
Expert
2NO-2CM OFF Time
Delay
Sets the delay time to deactivate the contact after the function set in
H2-01
deactivates.
0 ms
(0 - 65000 ms)
■
b4-05 3NO-3CM ON Time Delay
No.
(Hex.)
Name
Description
Default
(Range)
b4-05
(0B32)
Expert
3NO-3CM ON Time Delay
Sets the delay time to activate the contact after the function set in
H2-02
activates.
0 ms
(0 - 65000 ms)
■
b4-06 3NO-3CM OFF Time Delay
No.
(Hex.)
Name
Description
Default
(Range)
b4-06
(0B33)
Expert
3NO-3CM OFF Time
Delay
Sets the delay time to deactivate the contact after the function set in
H2-02
deactivates.
0 ms
(0 - 65000 ms)
■
b4-07 4NO-4CM ON Time Delay
No.
(Hex.)
Name
Description
Default
(Range)
b4-07
(0B34)
Expert
4NO-4CM ON Time Delay
Sets the delay time to activate the contact after the function set in
H2-03
activates.
0 ms
(0 - 65000 ms)
■
b4-08 4NO-4CM OFF Time Delay
No.
(Hex.)
Name
Description
Default
(Range)
b4-08
(0B35)
Expert
4NO-4CM OFF Time
Delay
Sets the delay time to deactivate the contact after the function set in
H2-03
deactivates.
0 ms
(0 - 65000 ms)
◆
b5: PID CONTROL
The drive has a PID control function. You can control drive output to adjust the proportional gain, integral time,
and derivative time that has an effect on the bias between the target value and the feedback value to match the
target value to the detected value. Use this function to adjust the drive output to accurately match the flow,
pressure, and temperature in the application match the target value.
Use a combination of these controls to increase the performance:
•
P control
P control has a proportional effect on the deviation. It outputs the product (the controlled output) proportional to
the deviation. You cannot use only the offset from P control to get to zero deviation.
•
I control
I control is the integral of the deviation. It uses an integral value of the deviation to output the product (the
controlled output). I control helps align the feedback value and the target value.
•
D control
D control is the derivative of the deviation. D control has an effect on drive output when there are sudden, large
changes in the output. It quickly returns drive output to the value before the sudden change. It multiplies a time
constant by a derivative value of the deviation (slope of the deviation), and adds that result to PID input to
calculate the deviation of the signal, then it corrects the deviation.
Note:
D control has causes less stable operation because the noise changes the deviation signal. Use D control only when necessary.
V/f
CL-V/f
OLV
CLV
AOLV
OLV/PM
OLV/PM AOLV/PM CLV/PM
EZOLV
V/f
CL-V/f
OLV
CLV
AOLV
OLV/PM
OLV/PM AOLV/PM CLV/PM
EZOLV
V/f
CL-V/f
OLV
CLV
AOLV
OLV/PM
OLV/PM AOLV/PM CLV/PM
EZOLV
V/f
CL-V/f
OLV
CLV
AOLV
OLV/PM
OLV/PM AOLV/PM CLV/PM
EZOLV
V/f
CL-V/f
OLV
CLV
AOLV
OLV/PM
OLV/PM AOLV/PM CLV/PM
EZOLV
Содержание Q2A
