User Manual
10. Uplink port LAG service Configuration
91
www.qtech.ru
10.2.
Static trunk configuration steps:
The default configuration is trunk 1:
OLT (config) #interface trunk 1
In the uplink interface configuration mode, add the port to trunk.
OLT (config) #interface xe1 / 1
OLT (config-xe1 / 1) # trunk 1
OLT (config) #interface xe1 / 2
OLT (config-xe1 / 2) # trunk 1
Configure trunk VLAN and rate.
OLT (config) # interface xe1 / 1
OLT (config-xe1 / 1) # no shutdown
OLT (config-xe1 / 1) # speed 1000
OLT (config-xe1 / 1) #switchport mode trunk
OLT (config-xe1 / 1) # switchport trunk tag 200
OLT (config) # interface xe1 / 2
OLT (config-xe1 / 2) # no shutdown
OLT (config-xe1 / 2) # speed 1000
OLT (config-xe1 / 2) #switchport mode trunk
OLT (config-xe1 / 2) # switchport trunk tag 200
View trunk state
OLT (config) # show
trunk
OLT (config) # show trunk verbose
Содержание QSW-9010
Страница 1: ...USER MANUAL www qtech ru QSW 9010 CLI Configuration user manual QSW 9010...
Страница 23: ...User Manual 2 Basic service configuration 23 www qtech ru...
Страница 71: ...User Manual 6 QoS service configuration 71 www qtech ru...
Страница 96: ...User Manual 12 Port statistics and PM statistics 96 www qtech ru...