User Manual
3. Remote ONU function configuration
26
www.qtech.ru
Description:
By default, ONU is active.
3.3.
ONU Information View
QSW-9010 (config-gpon-olt7 / 6) # show onu remote info
3.4.
ONU uni Port Enable/Disable
This command is used to control the uni port management status of the remote ONU, and
configure
the Ethernet type user port to "enable" or "disable".
Enable:
OLT (config) interface gpon-onu1 / 1: 1
OLT (config-gpon-onu1 / 1: 1) # remote uni eth_1 / 1 enable
Disable:
OLT (config-gpon-onu1 / 1: 1) # remote uni eth_1 / 1 disable
Description:
By default, all uni ONU ports are “enable” state.
3.5.
ONU capability set query
This command is used to query ONU actual ability. After the query to the actual capability of the ONT,
it can create the appropriate profile of ONT capability set based on it. .
QSW-9010 (config-gpon-onu7 / 6: 3) # show onu remote capability
Содержание QSW-9010
Страница 1: ...USER MANUAL www qtech ru QSW 9010 CLI Configuration user manual QSW 9010...
Страница 23: ...User Manual 2 Basic service configuration 23 www qtech ru...
Страница 71: ...User Manual 6 QoS service configuration 71 www qtech ru...
Страница 96: ...User Manual 12 Port statistics and PM statistics 96 www qtech ru...