q-Tech QSW-9010, Руководство по настройке CLI

Страница: 19 / 101

User Manual
1. GPON properties 19
www.qtech.ru
1.12. View the current system CPU|PON Optics| switching chip|PON chip
temperature
OLT(config)# show environment temperature
Cpu Chip Temperture : 36 C
Pon Optics Temperture
: 33 C Switch Chip Temperture : 38 C
Pon Chip Temperture : 35 C
Note:
The OLT QSW-9010 can view the device temperature; does not support this command.
1.13. CTC-enable
When this feature is enabled, OLT will follow the CTC standard, which defaults to "ITU" rules.
1.14. Broadcast storm suppression
In order to prevent the broadcast storm, unknown unicast and multicast storm, by default the OLT
uplink port message suppression PPS value will be 100.
OLT(config)# interface xe1/1
OLT(config-xe1/1)# storm-control broadcast pps 100
OLT(config-xe1/1)# storm-control multicast pps 100
OLT(config-xe1/1)# storm-control unicast pps 100
1.15. OLT Default Route Configuration
OLT(config)# ip route
OLT(config-ip-route)# ip route 0.0.0.0/0 10.1.1.1
OLT(config-ip-route)# exit
OLT(config)# show ip static-route
static ip route
-----------------------------
0.0.0.0/0 via 10.1.1.1