q-Tech QSW-9010, Руководство по настройке CLI

Страница: 16 / 101

User Manual
1. GPON properties 16
www.qtech.ru
2. On the computer by using the ping command, you can reach the corresponding management
IP address.
3. Open the TFTP server or FTP server locally, and upgrade the software to the file path specified
by TFTP or FTP.
4. Run in administrator mode:
OLT# upgrade TFTP 192.168.17.117 GPON3116.tar.gz
or
OLT # upgrade FTP 192.168.17.117 GPON3116.tar.gz username
password
IP is the local computer IP, requiring to be able to Ping the OLT in-band / out-band management IP.
Note:
recommend using an out-band management port for upgrading. When you upgrade in the above ways,
make sure that the windows firewall is off , otherwise it may cause the upgrade to fail.
1.9. Operation User Management
Operation user means the configuration and maintenance staff that use CLI terminals, including
series and telnet.
User management divides the operation user's permissions into 15 levels at 1~15
1.9.1. Operation user rights description
Table 1-2 Operation user rights description
User Level Rights Description
Level 1 Operator mode, no administrator right;
Level 2
Administrator mode, can not enter global configuration mode
Can execute 1~2 orders
Level 3
～
15
Can enter global configuration mode, and execute 1~15 orders. Also
can maintain and manage the equipments and user accounts.