52
53
CHAPTER 7 REMOTE SUR
VEILLANCE
STEP 5.
Click on
CHECK NOW
to
detect how many Routers are in the
network.
In this case, you will need to proceed with the next section using the IP address for Router 1
to forward its ports. After that, you will need to proceed on to
Setting UP DMZ in Router 2
afterwards.
PICTURE 7-23
PICTURE 7-21
PICTURE 7-22
DETERMINE THE NUMBER OF ROUTERS ON THE NETWORK
To find out the number of routers on your network, you will need to download a
FREE
router
detection program.
STEP 1.
Go to
http://www.pcwintech.
com/shanes-toolbox
STEP 2.
Click on
Detect Multiple
Routers
to begin the download.
STEP 3.
Unzip the application to install it.
STEP 4.
Click on the
detect_routers
application to run it.
STEP 6
. If there is only one router detected, then you may skip to
Section 3: Simple
Port Forwarding
.
PICTURE 7-24
If Multiple Routers are Detected
If there are multiple routers, you will see a
display similar to
Picture 7-24
.
If so, it may be preferable to connect your
DVR and computer to the router that
connects directly to the Internet. However,
this is not always possible depending upon
your particular situation.
