![Q-FREE ITS-950 ParQSense Скачать руководство пользователя страница 8](http://html.mh-extra.com/html/q-free/its-950-parqsense/its-950-parqsense_installation-manual_764280008.webp)
Q-Free
ITS-950 ParQSense Base station Installation Manual
Page 8 of 12
4 INSTALLATION OF THE EQUIPMENT
The following section describes the installation steps for installing the ITS-950 ParQSense Base Station.
4.1 Pole Mount
The ITS-950 ParQSense Base Station will be provided with a pole mount kit. This can be used for
mounting the ITS-950 ParQSense Base Station to the proposed pole location.
Figure 3 Pole Mount Kit
1. Remove ITS-950 ParQSense Base Station back plate from unit.
2. Attach pole mount kit to back panel
3. Mark mounting holes of back plate.
4. Drill holes. Insert anchors.
5. Attach back plate using hardware to installed anchors.
6. Reattach ITS-950 ParQSense Base Station to back plate.
7. Plug in the outdoor rated Cat5 cables using an outdoor rated connected to the ITS-950
ParQSense Base Station
8. Check for connectivity and activity on the Status Lights on the bottom of the unit near the Cat5
connection.
4.2 Wall mount
The ITS-950 ParQSense Base Station can also be wall mounted using the provided wall
mounting back plate.
1. Remove ITS-950 ParQSense Base Station back plate from unit.
2. Align and measure location of back plate.
3. Mark mounting holes of back plate.
4. Drill holes. Insert anchors.