12
13
INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO-G10.X – Q CELLS
INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.PEAK DUO-G10.X – Q CELLS
12
13
Note! Module damage may occur!
Ä
Do not stack modules.
Note! Module damage may occur!
Ä
Do not install modules near flammable
gas / vapors.
Ä
Do not install modules in close proximity to air
conditioning systems.
Note! Module damage may occur!
Ä
Do not drop modules.
Note! Module damage may occur!
Ä
Only make modifications to the module which
have been confirmed in writing by Q CELLS.
confirmation
letter
Note! Module damage may occur!
Ä
Never lift or move the module with the
connection cables or junction box.
Ä
Carry modules upright and horizontally as
shown.
Note! Module damage may occur!
Ä
Never step on modules.
Ä
Do not subject modules to any mechanical
stress.
Ä
Do not allow any objects to fall onto modules
3 INSTALLATION
3.1 SAFETY AND TRANSPORT
Danger! Risk of fatal injury due to electric
shock!
Ä
Block off the installation zone.
Ä
Keep children and unauthorized individuals
away from the solar power system.
Danger! Risk of fatal injury due to electric
shock!
Ä
Ensure that modules and tools are not subject
to moisture or rain at any time during instal-
lation.
Warning! Risk of injury due to falling
modules!
Ä
Secure modules during installation.
Ä
Do not install modules in windy or wet
weather.
Danger! Risk of fatal injury due to electric
shock!
Ä
Only use dry, insulated tools.
Ä
Do not carry out the installation alone.
•
Only install undamaged modules and
components.
Ä
Do not modify the module
(e.g. do not drill any additional holes).
3 INSTALLATION
3.2 PREPARATION OF INSTALLATION
