12
13
INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.MAXX-G2 – Q CELLS
INSTALLATION AND OPERATION MANUAL SOLAR MODULES Q.MAXX-G2 – Q CELLS
13
12
Danger! Risk of fatal injury due to electric
shock!
Ä
Block off the installation zone.
Ä
Keep children and unauthorized individuals
away from the solar power system.
Danger! Risk of fatal injury due to electric
shock!
Ä
Ensure that modules and tools are not subject
to moisture or rain at any time during instal-
lation.
Warning! Risk of injury due to falling
modules!
Ä
Secure modules during installation.
Ä
Do not install modules in windy or wet
weather.
Danger! Risk of fatal injury due to electric
shock!
Ä
Only use dry, insulated tools.
Ä
Do not carry out the installation alone.
•
Only install undamaged modules and
components.
Ä
Do not modify the module
(e.g. do not drill any additional holes).
3 INSTALLATION
3.2 PREPARATION OF INSTALLATION
Option 1:
Ä
Fasten the module with 4 clamps in the
specified clamping range,
see Fig. 2, p. 7.
Ä
Tighten clamps according to
manufacturer’s instructions.
Ä
Maintain an interval of at least 10 mm between
two modules along the short side and 5 mm
along the long side.
10 mm
5 mm
EU
Note! Module damage may occur!
Ä
Do not subject modules to mechanical tension.
Max. torsion 10 mm/m.
Option 2:
Ä
Install the module at the 4 mounting points,
see Fig. 2, p. 7.
Ä
Tighten screws according to
manufacturer’s instructions.
Option 3:
Ä
Install the module using mounting profiles,
see Fig. 2, p. 7.
3 INSTALLATION
3.3 MODULE INSTALLATION
