Pyxis SP-710B, Руководство пользователя, Страница: 8 / 41

3.1 Standard Accessories
• Four (4) AA alkaline batteries
• Bluetooth/USB Adapter for Desktop P/N: MA-NEB
• User Manual available online at www.pyxis-lab.com/support.html
3.2 Optional Accessories
The following optional accessories can be ordered from Pyxis Customer Service ( order@pyxis-lab.com ) or
Pyxis eStore at https://pyxis-lab.com/shop/ .
Table 2.
Accessory Name P/N
Replacement pH/ORP Module — Bluetooth 50315
Battery for pH/ORP Module 50778
Pyxis pH/ORP Storage Solution –– 70 mL 63900
Pyxis Carrying Case for SP-710B 50725
Pyxis 100 ppb PTSA + 1000 µS/cm (KCl) Combined Standard — 500 mL 21004
Pyxis 200 mV ORP Calibration Standard –– 500 mL 57020
Pyxis pH 4-7-10 Calibration Combination Kit –– 500 mL ea 57007
Pyxis 1000 µS/cm Conductivity Calibration Standard –– 500 mL 57008
Pyxis 50 ppb Fluorescein Calibration Standard — 500 mL FLUO-50
Pyxis 250 ppb Fluorescein Calibration Standard — 500 mL FLUO-250
Pyxis 500 ppb Fluorescein Calibration Standard — 500 mL FLUO-500
Pyxis Handheld Cleaning Kit SER-002
4 Installation
4.1 Main Module Battery Installation
The main module of the SP-710B is powered by four AA alkaline batteries. Typical battery life is 10,000 mea-
surements or 6 months. When the battery capacity is critically low, the SP-710B displays a ”LOW BATTERY”
warning for five seconds and then automatically turns off.
The SP-710B does not turn itself on automatically after the new battery installation. To turn on the SP-
710B after new battery installation, press the
OK key momentarily and release.
The SP-710B has a calendar timer. To prevent the calendar from being reset to the default date and time
(01/01/1970, 00:00:00), install the four new batteries within four minutes after the old batteries are re-
moved from the battery compartment. The SP-710B date and time is synchronized automatically when
connected with
uPyxis® Mobile or Desktop App.
The SP-710B battery compartment, shown in Figure 1, is on the back side of the instrument. Batteries
are held in place by a cover secured with two Phillips-head screws.
SP-710B User Manual service@pyxis-lab.com | +1 (866) 203-8397 5