pyroscience FireStingO2-Mini-ST, Руководство пользователя

Страница: 5 / 22

2
2 Safety Guidelines
In order to guarantee an optimal performance of the FireStingO2-
Mini-ST please follow these operation instructions and safety
guidelines. If any problems or damage evolve, please disconnect
the instrument immediately, mark it to prevent any further use and
consult
PyroScience for repair or maintenance service. The
FireStingO2-Mini-ST should not be manipulated or opened by
unauthorized persons (except for the needed steps in order to
solder the external PT100 to the internal PCB-board), only by
PyroScience or persons advised directly from PyroScience .
Please note that opening the housing (except removing the front
cap for accessing the solder pads for the external temperature
sensor) will void the warranty. There are no serviceable parts inside
the device.
The FireStingO2-Mini-ST and the sensors should be kept and
stored outside the reach of children in a secure place under dry and
clean conditions at room temperature, avoiding moisture, dust,
corrosive conditions and heating of the instrument. This device is
not intended for medical, military or other safety relevant areas. It
should be used in the laboratory by qualified personal only
following the operation instructions and safety guidelines of this
manual.
Please follow the appropriate laws and guidelines for safety like
EEC directives for protective labor legislation, national protective
labor legislation, safety regulations for accident prevention and
safety data-sheets from manufacturer of chemicals used during
measurements.
When used in the field, the environmental conditions (like high
humidity, dust, exposure to direct solar radiation) may cause
damage or interference of the
FireStingO2-Mini-ST , which is on
the user's authority.