background image

TV Size Range: 36

55

Maximum Weight Capacity: 35kg/77lbs

Locked by safety bolt on the bottom

"~ "

Balance adjust system is included

This product was designed to be installed on wood stud walls and solid concrete walls.
Before installing make sure the supporting surface will support the combined load of the
equipment and hardware. Never exceed the Maximum Load Capacity. This product is
intended for indoor use only. Use of this product outdoors could lead to product failure or
personal injury.

CAUTION

-8-

Thank you for choosing our product

Thank you for choosing our product

This product contains small items that could be a choking hazard if swallowed. Keep
these items away from young children
1.Make sure these instructions are read and completely understood before attempting
installation. If you are unsure of any part of this installation, contact a professional
installer for assistance.
2.The wall or mounting surface must be capable of supporting the combined weight of
the mount and the display; otherwise the structure must be reinforced
3.Safety gear and proper tools must be used. A minimum of two people are required
for this installation. Failure to use safety gear can result in property damage, serious
injury or death.

!

.

Warning

Item No.:

PSWLE57

Item No.:

PSWLE57

INSTALLATION GUIDE

www pyleaudio com

.

.

P yle Audio
1600 63rd st , Brooklyn, NY, 11204
(718)236-8000

Содержание PSWLE57

Страница 1: ...uct contains small items that could be a choking hazard if swallowed Keep these items away from young children 1 Make sure these instructions are read and completely understood before attempting installation If you are unsure of any part of this installation contact a professional installer for assistance 2 The wall or mounting surface must be capable of supporting the combined weight of the mount...

Страница 2: ...6 36mm bolt M 36mm 8 bolt D 4 4 4 4 4 F G H ID Description Qty M8 16mm bolt 4 E A 4 M4 mm 12 bolt Right bracket 4 NOTE Always use an assistant or mechanical lifting equipment to safely lift and position heavy equipment NOTE Part 3 Mounting the flat panel screen Hook the top of brackets onto the top flange of wall plate 1 Then swing the screen down Tighten the safety screw on each bracket to lock t...

Страница 3: ...vertighten Part 2b Attaching brackets to screen with recessed back 3 Part 1a Wood Stud Mounting Use wall plate as a template make sure it is level and mark mounting holes along the center lines of the wood studs Drill 3 16 5mm dia holes 2 50mm deep Level wall plate and attach to wall with long bolts J and washers L Tighten screws firmly Do not overtighten Part 1a Wood Stud Mounting Wood stud J L B...

Страница 4: ...t overtighten Part 2a Attaching Brackets To Screen With Flat Back 4 Part 1b Concrete Wall Mounting Level wall plate and use it as a template to mark holes Drill 3 8 10mm dia holes 2 50mm deep Insert anchors K into holes and secure wall plate with long bolts J and washers L Tighten screws firmly Do not overtighten Part 1b Concrete Wall Mounting Concrete Wall 2 50mm Φ3 8 10mm Bubble level K J L A E ...

Отзывы: