6.Error message and solution
Message
Error
Solution
( A )
( b )
( r )
( A )
The batch display may shows some error message when counting, which means there are some problems with the machine.
Refer to the following diagram to find way to solve it.
Suspicious bill detected by UV system;
Problem in the UV system
Suspicious bill detected by UV system;
Problem in the UV system
Suspicious bill detected by MG system;
Problem in the MG system
Suspicious bill detected by IR system;
Problem in the IR system
Remove the last bill from the stacker,press
“
RSTART”to continue;lower the UV sensitivity.
Remove the bill before last from the stacker,press
“
RSTART”to continue;lower the UV sensitivity.
Remove the suspicious bill from the stacker ,
press “RESTART” to continue;
Lower the MG sensitivity
Remove the suspicious bill from the stacker ,
press “RESTART” to continue;
Lower the IR sensitivity
11
HIGH QUALITY AND LEADING ARTICLE IN THE
BILL COUNTER
7.Trouble shooting
Error code
Type of error
Cause of error
EJ
Jam
A note is jammed
in the machine
Double note detection
Eh
Half note detection
Chained note detection
EC
( E J )
(Ed)
(EH)
(EC)
Note is in the Stacker
(St)
When an error occurs, its corresponding error code is displayedon the Batch Number Display. Find the cause of error by
the displayed error code and remove the cause according to the following procedure.
Procedure for the removing the cause of the error
1.Remove notes from in the Hopper
2.Set all the removed notes into the Hopper
again.
3.Restart counting operation by pressing the
“
RESTART”key.
Abnormal notes in
mixed in the bundle
of notes to be
counted.
Check all the notes on the Hopper. then set them again Press the
“
RESTART” key toStart counting operation.
Note(s) is remains in the
Stacker.
Remove the note(s) left in the stacker.
12
BILL COUNTER
HIGH QUALITY AND LEADING ARTICLE IN THE
