Owner' 5 Manual
PYLE"PR()
���
PPDlAl
Technical parameter
DIGITAL DElAY\CHOAUS\DISTORTION\OVER DRIVE
MULTI EFFECT PEDAL
Power supply:9v(6 F22 )t9v300mAAdapter
Current Oraw:90mA(9vDC)
Input Impedance:l
MQ
3
�
2
4
6
�
7
9 1 21113 14
I
,
,'
,
,'
,
,'
,
,'
:
,'
,
17',6'819
"
, "
Output Impedance:Over 10KQ
:
: '
•
.
"""
:
:
Parts and functions
I>.n
...
,
... c�
,
S
.HO
DEI'TlO
�
TON.
OIllVI'
Dlg
i
to
l
delay control instructions:
1.E.LEVEl
-
_
...
PPEo .... '
T h
d·
I
(
I
I (
(
EolEVU
JI
""
lEll£l
'-"VEL
lEVU
e a
JUS
men!
0
eve delay ef eel)
22
Level increasered with rotate clockwise,
-
�
_ ....
'::
\
2.'.
conversely, level decreased.
2.F.BACK
'
"
I
The adjustment of feedback Feed back
increased with rotate clockwise ,conversely,
feedback decreased.
3.D.TIME
The adjustment of delay time Delay lime
increased with rotate clockwise conversely,
delay time decreased.
4.CHECK
The check indicator shows whether an effect is ontoff,
and also doubles as the battery check indicator. the
indicator lights when an effect is on.1f this indicator
goes dim or no longer lights while an effect is on.the
battery is near exhaustion and should be replaced
immediately.
S.OIGITAL DELAY
Digital delay control switch.
Chorus control
i
nst
r
uct
i
on
s
:
6.SPEED knob
The actual speed of the chorus is determined by this
control.Effect is increased when control is turned
clockwise and decreased when turned counter clockwise.
7.DEPTH knob
This width control gives an intensive sound to the chorus
effect as the control is increased. Effect is increased
when turned clockwise and decreased when turned
counterclockwise.
a.E.LEVEL knob
The effect level control adjust the output level.
9.CHECK
Check
indicator of
the chorus.
10.CHORUS
Chorus control switch.
Distortion control instructions:
11.LEVEL Knob
This knob adjusts the level of the effect
sounds. set the knob so there is no volume
difference between the effect and straight
guitar sounds.
12.TONE Knob
This knob controls the tone of the distortion
sounds. Rotating the knob clockwise cuts
Lower frequencies,creating sharp sounds.
Rotating the knob counterclockwise cuts
higher frequencies. creating softer,warmer
sounds.
13.01ST Knob
This knob controls the depth of distortion
sounds and the length of sustained sounds.
Rotating the knob clockwise creates deeper
distortion and a longer sustain time.
14.CHECK
check indicator of the distortion.
15.0ISTORTION
Distortion control switch.
Over Drive control instructions:
lB.lEVEL Knob
This controls the level of the distortion. For a greater volume
of distortion turn the control clockwise and for less volume
turn counterclockwise.
17.TONE Knob
This controls the tone characteristics of the distortion.
Bassier settings are achieved By turning the control
counterclockwise and higher, more trebely setting when
turned clockwise.
la.DRIVE Knob
To control the tone characteristics of the distortion. Bassier
settings are achieved By turning the control counterclockwise
and higher, more trebely setting when turned clockwise.
19.CHECK
Check indicator of the over drive.
20.0VER DRIVE
Over drive control switch.
21.INPUT JACK
This jack accepts input signals(coming from a guitar, some
other electric or electronic musical instrument, or another
effects unit.)
22.0UTPUT JACK
The output jacks are used to connect the unit to amplifiers
or other devices.
23.AC Adapter Jack
Accepts connection of an AC Adapter. By using an AC
Adapter, you can play without being concerned about how
much battery power you have left.
24.Battery Housing
9V Battery is placed inside it.
Points of attention
1.Please read the instruction carefully before use it and
make it clear about the functions of differen switch. button.
knob.
2.Pull the plug out when long time not used it.
3.Please send it to the designated maintenance department
for repair when failures.
4.The above information is subject to change without
notification.
