cuff inflates, and your pulse and blood pressure measurement is taken.
5)
When completing the test, the cuff will automatically deflate and the test result will
display on the screen as shown on fig 13.
6)
You may turn off the unit or compare with the previous results
7)
Automatic shut off in 3 minutes.
8)
If a problem occur during the test, “Err ” will display on the screen.
9)
In the end of measurement, “
” will display on the screen when irregular pulse is
detected.
Fig
10
Fig
11
Fig
12
Fig
13
Notes:
Do not self-diagnosis according to measurement results. Follow the instructions of your
physician or licensed healthcare provider.
The blood pressure monitor only will remind the end user on high blood pressure as follows:
When the systolic pressure is greater or equal to 140mmHg and/or when the diastolic pressure
is greater or equal to 90mmHg as abnormal. The display will flash to remind the end user of
the blood pressure abnormality.
If the device caused any discomfort during measurement or fail to perform as indicated, turn
off the power or discontinue use.
The time of the pressure reduced from 260mmHg (34.67kPa) to 15mmHg (2kPa) does not
exceed 10s.
If cuff inflated up to 300 mmHg (40 kPa) doesn’t stop, please remove the cuff or power off
the unit
4.5 Bluetooth Connection and Data Transmission
The Bluetooth can be turned on after the device is connected to the AC adapter or you have
installed the batteries, the device can transmit data to the PHBP Blood Pressure App by
Bluetooth.
Download and install the PHBP Blood Pressure App on your Android or iOS device
Please be sure that Bluetooth is turned on your device
Search for the PHBPB16TL on your device. Once the device is found select it for automatic
pairing.
Start the PHBP Blood Pressure App and follow the directions included in App.
