3.3 Setting
1)
With monitor power off
2)
Hold the
【
S
】
button for 3 seconds, Year digits blinking
a)
Change number
ⅰ
Press the memory button to advance one number
ⅱ
Hold down the
【
M
】
memory button, the number will change rapidly
b)
Enter the two digit of the year number
c)
Press the
【
S
】
button will proceed to month setting
d)
Repeat step a) to c) to set month, day, hour and minutes
3)
Unit Conversion (mmHg to kPa)
a)
Press the memory button will automatically change the unit conversion either from
mmHg or kPa as shown on Fig 6 or Fig 7.
b)
Complete setting, press Start/Stop button to exit.
Fig
6
Fig
7
4 Take a measurement
4.1 Important Noted
Don't eat, drink alcohol, smoke, take a shower or exercise for at least 30 minutes before you
take your blood pressure and don't use any medicines that can raise blood pressure.
Try not to take your blood pressure if you are nervous or upset. If you are nervous, anxious,
or agitated your blood pressure will rise.
Rest for 5
～
10 minutes before taking a reading. Sit in a comfortable, relaxed position. Don't
move around or talk while taking the blood pressure. Leave your legs in one position, breath
freely and calmly.
The blood pressure cuff should fit over about 3/4 of your upper arm. It should easily go
around the arm and the Velcro should close tightly.
If you can, use the same arm for every reading.
Measuring blood pressure at the same time on different days should give about the same
reading (excluding outside influences like exercise).
Changes in medication or nutritional supplement can alter your result. Please consult your
doctor before taking or stopping medications or supplement.
4.2 Fitting the cuff
1)
Plug in the air tube connector into the main unit
2)
Wrap the cuff around the upper left arm or upper right arm.
