Pye Video E7A02UD, Руководство по обслуживанию

Страница: 11 / 57

1-5-1 E7A00DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps to gain
access to item(s) to be serviced. When reassembling,
follow the steps in reverse order. Bend, route, and
dress the cables as they were originally.
2. Disassembly Method
Note:
(1) Identification (location) No. of parts in the figures
(2) Name of the part
(3) Figure Number for reference
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to “Reference Notes.”
Reference Notes
1. CAUTION 1: Locking Tabs (L-1) and (L-2) are
fragile. Be careful not to break them.
ID/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Desolder
Note
[1] Top Cover D1 7(S-1) ---
[2]
Front
Assembly
D2 *6(L-1), *3(L-2) 1
[3]
DVD
Mechanism
& DVD Main
CBA
Assembly
D3
4(S-2), *CN101,
*CN701,
Locking Card Spacers,
Main Sheet
---
[4] SW CBA D4
(S-3), S Earth Plate,
Desolder
---
[5] PCB Holder D4 2(S-4) ---
[6] Rear Panel D5 2(S-5), 6(S-6) ---
[7] AV CBA D5 3(S-7) ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
[1] Top Cover
[2] Front Assembly
[3] DVD Mechanism & DVD Main CBA Assembly
[4] SW CBA
[5] PCB Holder
[6] Rear Panel
[7] AV CBA
[1] Top Cover
(S-1)
(S-1)
(S-1)
Fig. D1