PXM PX787, Руководство пользователя

Страница: 34 / 60

6.3 DALI
The DALI tab allows to manage found ballasts on the DALI line. It is
possible to quickly search for devices or initiate a search for devices that were
not previously in the PX787 memory. Changing the DALI ballast parameters
and searching for them is possible only when the DMX DALI signal
→
conversion is disabled.
Description of displayed parameters:
• DALI Bus – if the line is powered from an external source and works
correctly, the message Operational is displayed, in the event of a
power failure of the DALI line the message No power supply is
displayed,
• Ballast found – amount of ballasts found on the line,
34
DALI line status
(power supply)
DALI device address
quick search
searching for devices from
scratch (assigns new DALI addresses)
groups to which
the device is assigned
type of DALI
devices found
the amount
of ballasts found
current value
on the ballast
deselects
selected devices
pastes copied settings to selected DALI devices
(copied settings are marked in gray)
custom device name
actions for individual ballasts