PXM PX254, Руководство пользователя

Страница: 5 / 19

5
number of channels being sent in the MASTER mode
white colour balance setting
red balance
green balance
blue balance
white colour balance on / off
program playback speed
level of steps change smoothness in the program
red during scene programming colour
green colour during scene programming
basic frequency of brightness control
blue colour during scene programming
screen and DMX signal LED blanking
MASTER mode on / off
DMX address settings for first channel
5. DMX ADDRESS SETTING
The menu of the PX282 driver allows for setting the DMX address within a range between 1 and
506-511 depending on work mode of device. For example in RGB mode it occupies three
consecutive DMX addresses. If start address is set to 510, the last channel is occupied by
address 512.
To set the DMX address:
1. Set the Adr function.
2. Use the "next" or "previous" buttons to set the selected DMX address.
1 2
NEXT
ENTER
ENTER
programme no. 17
memory error message
restore default device settings menu