6.16 Connection test
The
Connection test
menu makes it possible to disable the correctness of
connection of outputs of the device during start of PX252. This function has
been designed to protect the device against damage as a result of miswiring.
By default it is enabled.
If miswiring is detected, an appropriate message will appear on screen.
Before switching on the unit again, check and correct wiring connections.
If the
connection test
function is disabled, PX252
will not check the connection correctness and thus
protect against damage as a result of miswiring.
6.17 Firmware version
In this submenu, it is possible to check the firmware and bootloader
versions installed on the device. Default settings implemented in the device
can be also restored.
28
Содержание PX252
Страница 1: ...PX252 Driver LED C C 6 x 350mA User manual...
