PXM PX184, Руководство пользователя

Страница: 17 / 25

0
100%
If this function is activated and the temperature sensor is incorrectly connected or there is
no sensor, the driver displays a relevant message –
at the current temperature
location, and instead of the first DMX address, i.e. at the very beginning of the menu. To
disable the message, connect an appropriate sensor or disable the temperature limit.
12. ADDITIONAL FUNCTIONS
12.1. Display flip (old FLP feature)
If necessary, the user can rotate the display without turning of the entire device.
To do this, hold down simultaneously for approx. 3s two middle buttons (previous and next).
NOTE : In addition to the display this feature turns also the order of the keys.
PX184 has additional functions: rotation of the display and default settings restoration; what is
more, the driver signals a built-in memory error.
To restore the default setting
hold once again the middle
keys for approximately
3 seconds.
PiXiMo
3700
www.pxm.eu
NTC
1 2
PiXiMo
3700
www.pxm.eu
NTC
1 2
11.2. Default settings and memory error
The device has been equipped with an option to restore default settings.
To use this option you must disconnect PX184 from power supply. Before re-applying the power,
press and hold the "previous" button. After turning on, the screen of the device shows a dFl
message (during the power-on until the display shows the dFl button the "previous" button must
be pressed).
17
Power
Sensor Turn On - __
by default: 60 ° C
Sensor Turn Off - __
by default: 90 ° C
Temperature
normal
position
flipped
display
158
130
23,4