PXM PX184, Руководство пользователя

Страница: 14 / 25

7.6 White balance
The white balance function is used to prevent problems that may arise when the white colour is
present in LED lamps from the RGB series. This may be caused by the use of LEDs with different
technical parameters. Using this option, you can select the right colour temperature for full control
of all three outputs (white colour).
To set the white balance:
1. Go to the Adr tab located in the group settings sub-
category, click "enter".
2. For each channel:
bLr - red colour
bLG - green colour
bLb - blue colour
select an appropriate value between 0 and 100
3. To confirm or reject pre-selected values, go to the next
bCn tab and select:
on - to turn on the white balance
oFF - to turn off the white balance.
NEXT
ENTER
ENTER
NEXT
NEXT
NEXT
ENTER
NEXT
4x
ENTER
7.7 The smoothing function
The PX184 device is equipped with a smoothing option. If this option is enabled, it allows for
smooth transitions between successive DMX values that are sent to the lamp (changes in
lightness and colour) without visible abrupt changes. This prevents the occurrence of "vibrations"
of light in lighting installations. Two successive DMX values sent to the lamp are smoothed
linearly between packets of DMX signal for the selected P2P option or within a time interval set in
the tim menu. ( ).
The enabled smoothing function may slightly slow down the lamp response rate to DMX signal
changes; therefore, this option can be disabled. To disable smoothing, select the diS parameter
and confirm the selection by pressing "enter".
ENTER
NEXT
NEXT
ENTER
NEXT
5x
ENTER
Time smoothing ( tim ) allows you to change the time parameter in
which successive, variable values of the DMX signal sent to the
lamp are smoothed between each other. The user can set the
smoothing time using the "previous" and "next" buttons between
the minimum value of 10 [ms], and the maximum value of 999 [ms].
14
158
130
23,4