PXM Gate 2 DMX RDM PoE, Руководство пользователя

Страница: 9 / 31

5.4 DMX IN / OUT port settings
The gate can work in two configurations of signal conversion:
Art-Net on DMX512 and DMX512 on Art-Net. To do this, the DMX 1 or 2 ports
must be set accordingly. The options are [in] and [out]. After selecting [out] the
signal is converted from the Art-Net network to the DMX output, analogically
after selecting the [in] option, the signal from the DMX input is converted to
Art-Net signal with the signal connection set (HTP / LTP) [Merge mode].
For each port, the settings can be changed in the Art-Net network
configuration [ART-NET config.] in the [Port n] menu option in the [Direction]
option. Information about the status of ports is available from the main menu.
9
ENTER
PX760 G2 DMX RDM
2.137.176.112
ENTER
Network config.
ENTER
IP address
2.137.176.112
IP address
[2].137.176.112
NEXT
ENTER
Subnet mask
255.0.0.0
Subnet mask
[255].0.0.0
NEXT
ENTER
Gateway address
2.0.0.1
Gateway address
[2].0.0.1
NEXT
ENTER
DHCP
Off
DHCP
[Off]
NEXT
DHCP
[On]
NEXT
ENTER
UDP port
6454 0x1936
UDP port
[6454 0x1936]
≡
≡
≡
≡
≡
->
2 x NEXT
ENTER
PX760 G2 DMX RDM
2.137.176.112
Directions
view ->
NEXT
ENTER
Port 1: out
Port 2: in