MR2 Manual
Revision B
/
June 2021
Page 14
of
34
27.
There are two ways to remove the washer/lip seal assembly from the piston. You can
use a vice or soft jaw pliers.
•
Use soft jaw pliers to hold the piston, use a screwdriver with the other hand to
loosen the piston lip screw.
Figure 17: Use Soft Grip Pliers
•
Install the piston into the vice. Make sure the vice has a soft grip. Use a
screwdriver to loosen the piston lip screw.
Figure 18: Piston in a Vice
28.
Separate the piston, washer, lip seal, and screw.
Figure 19: Components Separated
29.
Examine the lip seal for signs of wear and replace if damaged.
