PV Powered 1100 Скачать руководство пользователя | Manualshive

Страница: 33 / 42

background image

26

6.3 What is Not Covered

PV Powered does not warrant its products from any and all defects or damage caused by:

Normal wear and tear.

•

Shipping or transportation damages.

•

Improper installation.

•

Improper maintenance.

•

Excessive voltage or current conditions from the electrical grid or PV panels.

•

Exposure to unsuitable environmental conditions (including but not limited to dam-

•

age due to lightning strikes, storm, ﬁre, ﬂood, etc.).

Unauthorized or abnormal use, repair, modiﬁcation, or operation.

•

Negligence or accidents.

•

Material or workmanship not provided by PV Powered or its authorized service

•

centers.

This warranty also does not cover costs related to the removal, installation, or
troubleshooting of your electrical systems.

6.4 Disclaimer and Limitation of Liability

EXCEPT FOR THIS EXPRESS LIMITED WARRANTY, PV POWERED EXPRESSLY
EXCLUDES ALL WARRANTIES WITH RESPECT TO THE INVERTER AND DATA
MONITORING MODULE, EXPRESS AND IMPLIED, INCLUDING BUT NOT
LIMITED TO THE WARRANTY OF MERCHANTABILITY, THE WARRANTY OF
FITNESS FOR A PARTICULAR PURPOSE, AND ANY WARRANTIES THAT MAY
HAVE ARISEN FROM COURSE OF DEALING OR USAGE OF TRADE.

TO THE MAXIMUM EXTENT PERMITTED BY LAW, PV POWERED’S
AGGREGATE MONETARY LIABILITY TO THE CUSTOMER FOR ANY REASON
AND FOR ANY AND ALL CAUSES OF ACTION, WHETHER IN CONTRACT, TORT
OR OTHERWISE, WILL NOT EXCEED THE AMOUNT PAID TO PV POWERED
FOR THE INVERTER OR DATA MONITORING DEVICE. PV POWERED WILL
NOT BE LIABLE TO YOU UNDER ANY CAUSE OF ACTION, WHETHER
IN CONTRACT, TORT OR OTHERWISE, FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, CONSEQUENTIAL, OR PUNITIVE DAMAGES, EVEN IF PV
POWERED HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
THE ORIGINAL PRICE FOR THE INVERTER AND DATA MONITORING MODULE
AND PV POWERED’S OBLIGATIONS UNDER THIS EXPRESS LIMITED
WARRANTY ARE CONSIDERATION FOR LIMITING PV POWERED’S LIABILITY.

«
...
31
32
33
34
35
...
»

Содержание 1100











































Отзывы:

Нет отзывов

Похожие инструкции для 1100

Бренд: Samson Страницы: 28

Бренд: ICP DAS USA Страницы: 43

Бренд: Saftronics Страницы: 113

Бренд: Lindy Страницы: 14

Бренд: Racal Instruments Страницы: 12

Бренд: de Gier Страницы: 26

Бренд: Phaesun Страницы: 2

Бренд: Wolverine Страницы: 14

Бренд: Sioux Tools Страницы: 5

Бренд: Diodes Страницы: 5

175-Watt Pocket Power Inverter

Бренд: Enercell Страницы: 10

Бренд: Fronius Страницы: 52

Бренд: Tigo Страницы: 2

Бренд: Hal Communications Страницы: 64

Бренд: FMUser Страницы: 53

Бренд: Uhlenbrock Elektronik Страницы: 4

Бренд: Teac Страницы: 19

blueplanet 29.0 TL3 M1 OD II4S

Бренд: Kaco Страницы: 91

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды