User Manual
PT-SP-HD24DA
13
5.
EDID Management
The Extended Display Identification Data (EDID) is used by the source device to
match its video resolution with the connected display. By default, the source device
obtains its EDID from the first connected display. Meanwhile, since the displays
with different capabilities are connected to the splitter, the 3-pin DIP switch on the
front panel and the 4-pin DIP switch on the rear panel can be used in combination
to set the EDID to a fixed value to ensure the compatibility in video resolution.
Switch Status
Description
L.RES
The splitter reads all EDID information from all connected displays,
and choose the one with lowest resolution passing to the source.
PRESET
In this mode, the 4-pin DIP switch on the rear panel can be used to
select predefined EDID and customize a specific EDID as need.
H.RES
The splitter reads all EDID information from all connected displays,
and choose the one with highest resolution passing to the source.
Predefined EDID setting
When the 3-pin DIP switch on the front panel is in
PRESET
mode, the 4-pin DIP
switch on the rear panel can be used to set the EDID to a built-in fixed value. Use
the following table to determine the settings for the 4-pin DIP switch for specific
video resolution and audio capabilities.
