User Manual
PT-SP-HD24DA
10
3.
Panel Description
3.1
Front Panel
①
POWER LED:
The LED illuminates red when power is applied.
②
OUTPUT LEDs:
The LED illuminates green when there is HDMI output on the
corresponding channel.
③
SOURCE Button and LEDs:
Press the button to switch to next source device, and then the
corresponding input LED will illuminate green.
Press and hold the button at least three seconds to enable automatic
switching mode. The splitter will automatically select the first available
active source device starting at HDMI input 1.
Upon detecting a new source device connect, the splitter will
automatically select the new one. When an active source device is
removed, the splitter will switch to the next one.
Once restart the splitter, it will resume the last switching status.
Press and hold the button at least three seconds again to exit automatic
switching mode, and the current channel won’t be changed.
④
DISPLAY ON Button and LED:
Press the button to turn on displays. The LED
blinks green when press this button to send control signal.
1
2
3
4
5
6
7
9
8
